£14.50

Availability: In stock

Only 2 left

gUSH CO2 Indicator Jet Style

An elegant handmade glass indicator, that sits outside of your tank!

gUSH CO2 Indicator Jet Style

Click on above image to view full picture

Elegant Jet Style CO2 Indicator.


What it is:
An elegant Hand-made Glass CO2 Indicator, that sits outside of your tank! Maximum glass thickness between 7 - 8 mm, these are perfect on a rimless aquarium, made by gUSH. Please remember these are hand-made and sometimes variations occur in the sizing, if you need a specific size, please contact us before ordering to make sure we have one that will fit your aquarium.

What it does:
Maintaining the appropriate CO2 level is critical in a planted aquarium. Too much CO2 may harm your fish, whereas too little CO2 decreases plant growth and allows algae to take over. The handmade CO2 Glass Drop Checker makes it easy for you to know the approximate CO2 level inside the aquarium by comparing the colour of the reagent.

When the drop checker is placed correctly in the aquarium, the colour of the indicator solution will turn lime green when the optimal concentration of 30 ppm of CO2 is achieved in the aquarium water. A yellow or blue colour compared against a pH indicator colour chart indicates too much or too little CO2 in the water, respectively.

• BLUE=Low CO2 levels -> Increase rate of CO2
• GREEN=Proper CO2 levels -> No action required
• YELLOW=High CO2 levels -> Decrease rate of CO2

This set contains:
Box and protective sponge.
Jet Indicator Style Drop Checker.

Dimensions:
Height: 70mm
Overall width:35mm

What else you need to know:
Hand made with high quality glass, the CO2 Indicator can be cleaned easily using bleaching agent when dotted with algae. Rinse glassware thoroughly before putting it back to use.
4dkh water or pH reagent not supplied.

Aquarium Pictures courtesy of George Farmer.

Customer Reviews

Write Your Own Review

You're reviewing: gUSH CO2 Indicator Jet Style

Additional Information

Model CO2 Indicator Jet Style
Manufacturer Gush

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.